The P58 Hydrogen Inhaler is the entry point to serious hydrogen inhalation — a PEM electrolysis machine producing 1,000 ml/min of pure H₂, or combined H₂+O₂ flow at 2:1. CE certified, straightforward to operate, and built for daily home use. The starting point for anyone moving from hydrogen water to inhalation.
The PEM electrolysis stack at the heart of every machine we sell is rated to up to 10,000 hours of continuous operation — the same engineering tier used in industrial hydrogen equipment. That's not marketing. It's what the cell is built and tested to do.
13.6 years of daily 2-hour sessions before the cell hits its rated end-of-life.
Built in facilities certified to ISO 13485, the quality-management standard used by regulated manufacturers. The certification covers how the factory is run — it is not a medical-device registration of our products.
Electrical, EMC and restricted-substances compliance — published, not implied.
What the average wellness gadget is engineered to last. The gap is the point.
The maths: a 10,000-hour cell run 2 hours a day = 13.6 years. Run 1 hour a day = 27 years. The cost per session sits in the cents, not the dollars — and the chassis is built around a stack that outlives most home appliances. That's the difference between an industrial-grade machine and a cheaper unit that carries no published certification marks.
Hydrogen Machines products are general wellness devices. They are not medical devices and are not registered, approved or cleared as such by the TGA, FDA or any other regulator. References to industrial-grade engineering, ISO 13485 manufacturing and 10,000-hour stack life describe how the hardware is built — they are not medical, therapeutic or disease-treatment claims.
Hydrogen Machines has delivered to customers across six continents — France, Italy, Thailand, Australia, South Africa, Chile — and not one unit has ever been returned.
"I didn't expect to feel the difference the first time. I expected to feel it after a week. I was wrong."
"The machine arrived in France without a single issue. Setup took ten minutes. I've used it every evening since."
"The quality is obvious the moment you take it out of the box. This is not a gadget. It feels like the thing it says it is."
"My evening changed. That is the simplest way I can put it."
Delivered to six continents. Not one unit returned.
Every order tracked and insured door-to-door. Duties prepaid where supported. No surprises at customs.
The P58 is our recommended first machine. A proton-exchange-membrane (PEM) stack with cathode and anode coatings separates hydrogen from purified water at 99.992% purity. A capacitive touch panel handles flow selection, timer, and water-level monitoring — no app required.
Precision control for comfortable daily use.
Capacitive panel for flow, timer and TDS readout. No app, no pairing.
Proton-exchange membrane with cathode + anode coatings. Pure hydrogen, no ion contamination.
Step between 500, 1000 and 1500 ml/min to suit the session length.
Internal water tank — fill, seal, run. No external plumbing.
Set a session length and the machine shuts down automatically.
Stable hydrogen output, session after session.
Thermal protection circuit halts the stack before it overheats.
Designed to run for long sessions in a bedroom or study.
Hydrogen and oxygen produced on opposite sides of the membrane.
A PEM stack lets only water and protons cross — ions stay out. Cathode and anode coatings on either side of the membrane keep hydrogen production stable, efficient, and clean.
Electrolysis splits water into hydrogen and oxygen at the natural 2:1 ratio (2H₂O → 2H₂ + O₂). The PEM membrane keeps the two streams separated — you decide whether to breathe pure hydrogen, the combined hydrogen–oxygen flow, or split the machine between two users.
Connect the cannula to the H₂ outlet. You breathe 1000 ml/min pure h₂ at max setting. The oxygen stream vents separately.
Hardware: single nasal cannula (included).
Join both outlets with the Y connector and breathe the full combined hydrogen–oxygen flow at the natural 2:1 water-electrolysis ratio.
Hardware: Y connector (included with this model).
Run two people from one machine using the dual cannula accessory — each user takes a share of the flow.
Hardware: dual nasal cannula (sold separately).
Every inhaler ships complete and ready to use. Accessory contents may vary slightly by model.
Hydrogen works best as a protocol, not a single device. These are the pairings real customers order together — bundled with a discount on every add-on.
Everything you need to start a daily inhalation protocol — spare cannula, hydrogen water on demand, and dispersion goggles for facial exposure.
Dual nasal cannula and Y-connector let two people share a session simultaneously. Add the hydrogen bottle so each person continues hydration between sessions.
10-pack of single-use cannulas for client hygiene, dual cannula for paired sessions, plus the face mask for facial hydrogen exposure — the practitioner's protocol stack.
The full biohacker protocol — molecular hydrogen delivered through inhalation, transdermal bath absorption, and oral hydration. Most requested by repeat customers.
Bundle discounts apply to add-on items only. Items remain individually shippable and warranted under the standard 12-month warranty. Adjust quantities in your cart at any time.
Side-by-side comparisons across this range and against the products buyers most often consider alongside it.
Daily home protocol on a starter budget.
Use the Hydrogen Machine Selector for a personal recommendation report, or compare every machine side-by-side.
Built on engineering, education and a growing global presence.
Hydrogen Machines has been online since 2022 and continues to expand its educational resources, product range and international reach.
Google first indexed the website in September 2022.
A continually expanding library of educational articles, buying guides and FAQs designed to help customers make informed decisions.
Machine selectors, buying guides and comparison tools help visitors identify the most suitable hydrogen system for their intended use.
Products are supplied internationally with support for customers across multiple regions.
Hydrogen Machines offers products supported by recognised manufacturing and product certifications where applicable.
Learning Hub, Comparison Centre, Buying Guides and interactive tools are designed to help customers understand products before purchasing.
