Best for multi-user wellness rooms
- Three users at once — three independent flow outlets
- Highest total flow in the range — 3000 ml/min (2000 ml/min pure H₂)
- Built for 365-day continuous operation with no water change
- Three-speed flow control and built-in sterilisation lamp
Built to industrial-grade engineering standards. Not a consumer electronics product.
The PEM electrolysis stack at the heart of every machine we sell is rated to up to 10,000 hours of continuous operation — the same engineering tier used in industrial hydrogen equipment. That's not marketing. It's what the cell is built and tested to do.
13.6 years of daily 2-hour sessions before the cell hits its rated end-of-life.
Built in facilities certified to ISO 13485, the quality-management standard used by regulated manufacturers. The certification covers how the factory is run — it is not a medical-device registration of our products.
Electrical, EMC and restricted-substances compliance — published, not implied.
What the average wellness gadget is engineered to last. The gap is the point.
The maths: a 10,000-hour cell run 2 hours a day = 13.6 years. Run 1 hour a day = 27 years. The cost per session sits in the cents, not the dollars — and the chassis is built around a stack that outlives most home appliances. That's the difference between an industrial-grade machine and a cheaper unit that carries no published certification marks.
Hydrogen Machines products are general wellness devices. They are not medical devices and are not registered, approved or cleared as such by the TGA, FDA or any other regulator. References to industrial-grade engineering, ISO 13485 manufacturing and 10,000-hour stack life describe how the hardware is built — they are not medical, therapeutic or disease-treatment claims.
Flagship high-flow inhaler for multi-user sessions
The QY-A3000 is built for sustained, high-throughput hydrogen use — wellness rooms, recovery suites, shared family households, and serious daily protocols. An SPE/PEM membrane stack separates hydrogen from purified water at 99.991% purity, and three independent gas outlets let several users share a single session. Three-speed flow control and an upgraded silent module keep it quiet through long runs, while a built-in UV sterilisation lamp and bottom-wheel chassis allow the unit to run continuously for up to 365 days without a water change. Ozone-free, carbon-monoxide-free output.
Looks and strength in one
Precision control for comfortable daily use.
The highest output in the range — 2000 ml/min of pure H₂ at 99.991% purity.
Three independent gas outlets let two or three users share a single session.
Low / medium / high flow selection to suit the session length and number of users.
Hydrogen separation membrane with cathode + anode coatings — clean, stable output.
Built-in sterilisation lamp keeps the internal water loop clean for up to 365 days of continuous use.
Upgraded mute module and shock-absorbing chassis — designed to run all day in a shared room.
Step the timer in 30-minute increments up to six hours; the stack shuts down automatically.
Output stream contains no ozone and no carbon monoxide — only H₂ and O₂.
Bottom wheels and a balanced 14 kg chassis make it easy for one person to reposition.
Multiple use cases
Two gases. Three ways to use them.
Electrolysis splits water into hydrogen and oxygen at the natural 2:1 ratio (2H₂O → 2H₂ + O₂). The PEM membrane keeps the two streams separated — you decide whether to breathe pure hydrogen, the combined hydrogen–oxygen flow, or split the machine between two users.
Connect the cannula to the H₂ outlet. You breathe 2000 ml/min pure h₂. The oxygen stream vents separately.
Hardware: single nasal cannula (included).
Join both outlets with the Y connector and breathe the full combined hydrogen–oxygen flow at the natural 2:1 water-electrolysis ratio.
Hardware: Y connector (included with this model).
Run two people from one machine using the dual cannula accessory — each user takes a share of the flow.
Hardware: dual nasal cannula (sold separately).
Included in the Box
Every inhaler ships complete and ready to use. Accessory contents may vary slightly by model.
