Nano-Bubble Hydrogenation Rod
Up to 1,500 ppb dissolved hydrogen. 100 seconds. 316 stainless steel.
- Up to 1,500 ppb
- ·
- ~100 seconds
- ·
- 24+ hour stability
- ·
- 316 stainless steel
Free delivery on orders over A$79 — or free with any machine order.
Compatible with all Hydrogen Machines inhalers — connects to the hydrogen outlet via standard 8mm connector.
- Free over $79
- Quality-checked
- Faulty-only returns
What the Nano-Bubble Hydrogenation Rod does.
The Nano-Bubble Hydrogenation Rod is a 316 food-grade stainless steel diffuser that connects to the hydrogen outlet of any Hydrogen Machines inhaler and dissolves hydrogen gas into water using nano-scale bubble diffusion.
Instead of routing the hydrogen from your inhaler to a cannula for inhalation, the rod routes it into a glass or bottle of water — producing high-concentration hydrogen-rich water in approximately 100 seconds.
The result: up to 1,500 ppb dissolved hydrogen per cycle, stable above 1,000 ppb for 24+ hours in a sealed container.
This is the hydrogen water production accessory for buyers who already have a hydrogen inhaler and want to add hydrogen-rich drinking water to their protocol without purchasing a separate machine.
Specifications.
- Dissolved H₂ output
- Up to 1,500 ppb per cycle
- Stability
- Above 1,000 ppb for 24+ hours in a sealed container
- Production time
- ~100 seconds per cycle
- Material
- 316 food-grade stainless steel
- Connector
- Universal 8mm hydrogen outlet — fits all Hydrogen Machines inhalers
- Bubble technology
- Nano-scale bubble diffusion
- Compatible machines
- P58 · QY-A900 · QY-A1200 · QY-A1800 · W30 · QY-A3000 · DLPA-HO1800
- Not compatible with
- S69 · WZ-1 (bath systems — different outlet configuration)
How it works.
- Step 1 — Connect
Connect the rod to the hydrogen outlet of your inhaler using the included 8mm connector. Place the rod in a glass or bottle of water — fill the vessel to just below the water line.
- Step 2 — Run your inhaler
Start your inhaler as normal. Hydrogen flows from the outlet through the rod and dissolves into the water via nano-scale bubble diffusion. The rod produces visible fine bubbles in the water — smaller than standard diffuser stones, producing higher dissolved concentration faster.
- Step 3 — Drink or store
After approximately 100 seconds, the water contains up to 1,500 ppb dissolved hydrogen. Drink immediately for maximum concentration, or seal the container — concentration remains above 1,000 ppb for 24+ hours in a sealed vessel.
Why nano-scale bubbles produce higher dissolved hydrogen concentration.
Standard hydrogen diffuser stones produce microbubbles — typically 1,000nm to 1,000,000nm in diameter. Microbubbles rise relatively quickly to the surface and release their gas before fully dissolving.
The Nano-Bubble Hydrogenation Rod produces significantly smaller bubbles — in the nano-scale range — that dissolve into the water more completely before reaching the surface. The result is higher dissolved hydrogen concentration per cycle and longer stability in a sealed container.
This is why the rod produces up to 1,500 ppb in approximately 100 seconds — and why that concentration remains above 1,000 ppb for 24+ hours when sealed.
Note: the rod produces hydrogen-rich drinking water — not a nanobubble bath or nanobubble skin care system.
Who the rod is for.
Existing inhaler owners adding hydrogen water
If you already own a Hydrogen Machines inhaler and want to add hydrogen-rich drinking water to your protocol without a separate machine — the rod is the most cost-effective path. A$125. No new machine needed.
Buyers comparing the rod to the W30
The W30 Inhale + Drink All-in-One ($2,628 USD) produces ≥3,000 ppb hydrogen water simultaneously with 1,000 ml/min inhalation — in a single machine. The rod produces up to 1,500 ppb but cannot run inhalation and water production simultaneously — it routes the hydrogen to water production only. If you want both at the same time, the W30 is the correct choice.
Buyers interested in nanobubble hydrogen water
The rod is the most accessible nano-scale hydrogen water accessory at direct price. If you are specifically looking for a nanobubble spa or skin care system for professional aesthetics use, that is a different product category — see our guide for the distinction.
Spa treatment basin and facial preparation
For smaller treatment basins — facial bowls, foot baths or treatment vessels of 5–10 litres — the rod can produce hydrogen-rich water that raises dissolved hydrogen concentration to measurable levels in the treatment volume. Not a replacement for a dedicated bath system — but a useful accessory for spa operators who want to add hydrogen water to facial and localised treatment protocols without a separate machine.
What's in the box.
- — Nano-Bubble Hydrogenation Rod × 1
- — 8mm connector fitting × 1
- — User instruction card × 1
Pair with.
Full cert stack inhaler — pairs with the rod for inhalation and hydrogen water from one machine (alternating, not simultaneous).
Simultaneous inhalation and ≥3,000 ppb hydrogen water — if you want both at the same time.
Replace your cannula after switching between inhalation and water production modes.
Hydrogen Machines products are general wellness devices. Not medical devices. No claim is made to diagnose, treat, cure or prevent any disease or medical condition.